22.5 Kg CO₂ Fire Extinguisher

Recharge

• Do not rely on partially used or discharged extinguisher.
• Recharge after partial or complete use of extinguisher.
• Only use manufacturer approved replacement parts and authorised service provider for recharging.

Caution / Warning

• Do not use extinguisher even a small amount of discharge could cause it to lose pressure, which make it less effective or useless in case of fire.
• Do not use fire extinguisher on fire involving chlorine contain explosive, reaction could occur with mixture of chemicals.
• Do not puncture or incinerate the container even after discharged.
• Store away from direct sunlight & heat.

Inspection & Maintenance

Extinguisher should be check for:

• Any possible damage
• Corrosion
• Leakage
• Obstruction in discharge outlet
• Broken/Tampered seal
• Charge by weighing

Operating Manual

1. Carry the extinguisher to fire, keep the extinguisher upright & uncoil the hose.
2. Open the safety valve by rotating anti clock wise.
3. Aim nozzle at the base of the fire.
4. Sweep the nozzle side to side.